Below you will find a link to download a free set of STL files for 3D printing a miniature version of my product – the Multifunctional Bench.

Please note that the proportions of this bench differ from the original Bench v5. This is because the body of a doll and the body of a human are quite different. I had to adjust many dimensions to make the bench more suitable for my doll.

This project was not intended for commercial purposes; these files were made just to shoot one video and take a few photos before the bench was sent to gather dust on a shelf. However, I decided to share it with you and spent a few more hours to minimize potential printing difficulties.

I recommend using PETG plastic, but you can use PLA or any other type.

Additionally, for assembly, you will need:
1. A few 3x12 mm self-tapping screws (or similar)
2. A few 3x20 mm self-tapping screws (or similar)
3. A cord for the wrist and neck block (optional)
4. A screwdriver suitable for your screws
5. Possibly a hot glue gun and glue, lol

Again, this is not a commercial product, and its quality is due to the lack of free time. Sorry 😉

Best regards! - Alex - rope8rose